Injection hoses and accessories
Injection hoses are installed in construction joints to seal horizontal and vertical joints through subsequent injection. These hoses ensure a reliable, permanent seal, preventing water infiltration and enhancing the structure’s durability. By facilitating the direct application of an appropriate injection agent, they offer a precise and efficient method for sealing joints, ultimately contributing to the long-term performance of the construction.
MASTERTEC injection hose / grouting hose
| Designation | Packaging | Art. No. | Unit |
|---|---|---|---|
| Injection hose / injection hose by the meter yellow without sheathing | Ø 6/12 mm | 15898 | meter |
This PVC hose is designed to seal horizontal and vertical internal concrete construction joints safely and permanently against water. It features an outer diameter of approximately 12 mm and an inner diameter of around 6 mm. Additionally, it is equipped with slotted outlet openings that include a valve function, which ensures effective water control.
The hose provides reliable pressure water tightness of up to a maximum of 2 bar, which is equivalent to a 20-meter water column. This makes it ideal for use in water change zones, where varying water levels can be present.
The application temperature range for this hose is between approximately +6°C and +40°C, depending on the type of injection agent used. This wide range of temperatures allows it to perform well in different working conditions.
Moreover, the hose meets the requirements of service class A for load classes 1 and 2, in accordance with the WU guideline. This certification confirms its suitability for demanding construction projects that require high-performance and durability.
MASTERTEC injection hose / grouting hose
| Designation | Packaging | Art. No. | Unit |
|---|---|---|---|
| Injection hose / injection hose by the meter red with sheathing | Ø 5/10 mm | 15899 | meter |
This PVC hose is ideal for sealing horizontal and vertical internal concrete construction joints safely and permanently against water. With an outer diameter of approximately 12 mm and an inner diameter of about 6 mm, it features slotted outlet openings with a valve function, ensuring efficient water control.
The hose provides reliable pressure water tightness of up to a maximum of 2 bar, equivalent to a 20-meter water column, and is well-suited for use in water change zones. This makes it effective even in areas with fluctuating water levels.
The application temperature range, depending on the type of injection agent, is from about +6°C to +40°C, allowing for flexibility in various working conditions.
Additionally, the hose meets the requirements of service class A for load classes 1 and 2, in accordance with the WU guideline. This certification confirms its suitability for demanding construction projects.
Metal clamp
| Designation | Packaging | Art. No. | Unit |
|---|---|---|---|
| Metal clamp with pre-mounted nail for mounting injection hoses | (100 pieces) | 15902 | piece |
The metal clamp, made of durable galvanized steel and featuring a pre-assembled nail, is designed as an essential accessory for securely fastening injection hoses. This fastening clamp allows for the easy and efficient installation of injection hoses on concrete surfaces. The recommended fastening distance is less than 15 cm, ensuring a stable and reliable attachment.
The clamps offer flexibility in installation, as they can either be nailed or shot into place, depending on the specific requirements of the project. The inclusion of pre-assembled nails significantly simplifies the installation process, saving both time and labor while improving overall efficiency.
Additionally, these clamps are versatile and can be used in a variety of construction applications, making them a practical choice for different project needs. Their robust construction ensures long-term reliability, even under demanding conditions.
Grouting ends / injection ends
| Designation | Packaging | Art. No. | Unit |
|---|---|---|---|
| Grouting ends / injection ends individually blue | 50 cm length & grouting ends ⌀ 5/11 mm | 102430 | piece |
The in-house fabric-reinforced StockLine injection ends, made of PVC, come with sealing plugs and hose connectors, each 50 cm long and individually available in blue. These injection ends effectively lead the injection circuit out of the concrete construction joint. The injection hose can then be injected with a suitable agent via the injection end to securely seal the construction joint.
The different color options allow for easy identification and distinction between various injection circuits, ensuring a streamlined and organized process.
These injection ends are designed to meet service class A for load classes 1 and 2, in accordance with the WU guideline, confirming their high performance and durability in demanding construction applications.
Grouting ends / injection ends
| Designation | Packaging | Art. No. | Unit |
|---|---|---|---|
| Grouting ends / injection ends individually red | 50 cm length & grouting ends ⌀ 5/11 mm | 102431 | piece |
The in-house fabric-reinforced StockLine grouting ends/injection ends, made of PVC, are equipped with sealing plugs and hose connectors, each 50 cm long and individually available in blue. These grouting ends effectively guide the grouting circuit out of the concrete construction joint. The injection hose can then be filled with a suitable injection agent through the grouting end to securely seal the construction joint.
The different color options ensure easy identification and differentiation between the various grouting circuits, promoting an organized and efficient workflow.
These grouting ends meet service class A for load classes 1 and 2, in accordance with the WU guideline, ensuring their durability and high performance in challenging construction projects.
MASTERTEC snap-on clip
| Designation | Packaging | Art. No. | Unit |
|---|---|---|---|
| Plastic fastening clip type A | (100 pieces) | 120305 | piece |
100 Schnappi clips are perfect for securely fastening the injection hose in fresh concrete. Simply clip them on, and they will hold the hose firmly in place. They can also be pressed into drill holes with a diameter of Ø=8 mm, offering extra flexibility during installation.
The clips should be spaced 15 cm apart to ensure a stable attachment. Thanks to their easy handling, Schnappi clips save time and labor, making the installation process more efficient. They are durable and provide reliable performance, even under challenging conditions.
